Pentax 33WR Changing the Start-upScreen, 5 Press the Zbutton, to select O(On) or P(Off), 7 Press the OK button 4 times, Press the four-waycontroller (5)

Changing the Start-up Screen

You can display an image recorded with the camera as the welcome screen when the camera is turned on.

1 Select [Screen Setting] on the [BSet-up] menu. 2 Press the four-way controller (5).

The Screen Setting screen will be displayed.

3	Press the four-way controller (5).
		Change Start-up Screen
	The screen for changing the start-up screen will	Start-up Screen
4	be displayed.
	Press the four-way controller (45)		Optio
	to select O(On) or P(Off).
		Image	MENU Exit OK OK

ODisplays the start-up screen.

PDoes not display the start-up screen.

5 Press the Zbutton.

6 Use the four-way controller (45) to select the image you want to display as the start-up screen.

7 Press the OK button 4 times.

The camera is ready for capture or playback.

Once the start-up screen has been set, it will not be erased even if the original image is deleted or the SD Memory Card / MultiMediaCard is formatted. To delete the start-up screen, reset the setting. (1p.99)

6 Editing/Settings

97