Pentax 33WR Taking Panorama Pictures (Panorama Assist Mode), 3 Press the OK button, 5 Take the first image, 1 Press the four-waycontroller (3) in Capture Mode

Set shift direction

Shutter release button

Four-way controller

OK button

Taking Panorama Pictures (Panorama Assist Mode)

Using the included software (ACDSee™), you can easily join several images to form one panorama picture. Overlap and stitch the edges of images taken in Panorama Assist mode and create a panorama image.

1 Press the four-way controller (3) in Capture Mode.

The virtual mode dial is displayed.

2 Press the four-way controller (45) to select [ F (Panorama Assist)].

3 Press the OK button.

4 Press the four-way controller to set the shift direction.

4joins the images at the left.

5joins the images at the right.

2joins the images at the top.

3joins the images at the bottom.

The explanation described below indicates that 5is set.

5 Take the first image.
	100
Press the shutter release button to take the first
image. The right edge of the image is displayed
in half transparent form at the left of the LCD
monitor.	10/10/2003
	11:20

4 TakingPictures

53