Troubleshooting
Problem | Cause | Remedy |
The camera will | No batteries are | Check whether battery is installed. If not, |
not turn on. | installed. | install battery. |
| Battery/card cover is | Close the battery/card cover. |
| open. |
|
| Battery is installed | Check polarity of battery.Reinsert battery |
| incorrectly. | according to the +- symbols in the |
|
| battery compartment.(p.13) |
| Battery is exhausted. | Install new batteries in the camera or use |
|
| the AC adapter. |
No image on | Camera is connected to | The LCD monitor is always turned off |
the LCD | PC with USB cable. | when the camera is connected to a PC. |
monitor |
|
|
Camera is connected to | The LCD monitor is always turned off | |
| TV. | when the camera is connected to a TV. |
| Image is displayed but | Images on the LCD monitor may be hard |
| hard to see. | to see when taking pictures outside in |
|
| sunlight. |
Shutter release | Flash is charging. | While the flash status lamp is blinking red, |
button will not |
| the flash is being charged and a picture |
work. |
| cannot be taken.The lamp lights red when |
|
| charging is complete. |
| SD Memory Card is full. | Insert an SD Memory Card that is not full, |
|
| or delete unwanted images.(p.16, 79) |
| Camera is recording. | Please wait until recording is finished. |
10
Appendix
114