•When traveling abroad, be sure to take you international warranty card with you. You may also wish to take along the document Worldwide Service Network included with the product. This document is useful for making inquiries from your travel destination.
•Always confirm that the camera is working properly when the camera has not been used for a long time, or before important occasions (weddings, trips, etc.). PENTAX is not responsible for consequential damages (costs incurred for photography, lost profits, etc.) arising from failure of this product.
•The lens on this camera is not exchangeable. The lens is not removable.
•Do not clean the product with organic solvents such as thinner, alcohol, or benzene.
•Do not subject to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
•Do not store the camera with preservatives and chemicals. Storage in high temperatures and high humidity can cause molding. Remove from case and store in a dry and
•Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
•The temperature range for camera use is 0°C to 40°C.
•The LCD display may appear black under high temperatures, but will return to normal as temperatures normalize.
•The LCD display may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a fault.
•Periodic inspections are recommended every one to two years to maintain high performance.
•Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, retrieving the camera after decreasing the temperature difference.
•Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause a camera breakdown. Wipe dry any rain or water drops on the camera.
•See “Precautions when using an SD Memory Card” (p.19) for details on the SD Memory Card.
•Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction.
2