When Attaching the AF540FGZ to the Camera for Control Flash

Main flash

Control flash only: not used for main flash

(Preparation of Flash Unit Attached to Camera)

1 Firstly, set the wireless mode and channel of the flash unit attached to the camera, and register them on the camera.

Attach the AF540FGZ to the hot shoe of the camera after turning the camera off.

Set the power switch of the flash unit to (WIRELESS).

Press the wireless mode button (M/C/S) the

number of times required to display CONTROL on the LCD panel.

Slide down the setting switch to the (yellow

dot) to display the channel on the LCD panel.

Press the channel button (CH) and select a channel from 1CH to 4CH.

Slide the setting switch back up to the (white dot).

42