Turn the flash unit on the camera on.

5 Set the zoom position to suit the subject and place the flash unit at the desired location.

● When setting up a flash unit separately from the camera, use the off-camera shoe adapter F when using a tripod, or the off-camera shoe clip CL-10 when setting up in another location such as

6tabletop, chair, etc.

● If the camera's built-in flash unit is part of the combination, pop up the built-in flash unit.

7 Check that the ready lamp is lit, then take the picture.●When the built-in flash or the external flash

attached to the camera is fully charged, the flash icon ( )) will light up in the viewfinder and when the AF540FGZ is fully charged, the ready lamp on the AF540FGZ will blink.

●Position the slave unit(s) so that the slave sensor can receive the flash fired by the camera’s built-in flash unit or attached flash unit.

●The AF540FGZ will fire at the same time that the camera’s flash fires.

●Keep the distance from the built-in flash unit and AF540FGZ to the subject within 4 meters.

●The slave unit will turn off automatically after about 1 hour of non-operation when the auto power off function is set.

●Do not use red-eye reduction with the camera’s flash. This will result in the AF540FGZ firing by the pre-flash. For the same reason, set the camera to manual focus when firing the flash continuously so that the AF spotbeam does not operate with cameras that have AF spotbeam functions.

51