Pentax Using an Eye-FiCard, Use the, Press the, 4Press the 3button twice, Use the four-waycontroller (23), to select the action, and press the

228

7

Additional Changing

Settings

Using an Eye-Fi Card

You can transfer images to your computer via wireless LAN by using an SD Memory Card with a built-in wireless LAN (Eye-Fi card).

•Be sure to set up a wireless LAN access point on a computer in advance for the Eye-Fi card connection. It cannot be set up on the camera.

•Images are not transferred in the following cases:

•when an image has already been transferred

•when the size of a movie is 2 GB or more

•when an Eye-Fi card is write protected

•when a wireless LAN access point cannot be found

•when the battery level is low (battery level is F(red))

•For RAW images and movie files, the success of transfer depends on the specifications and settings of the Eye-Fi card in use.

1Select [Eye-Fi] in the [RSet-up 2] menu, and press the four-way controller (5).

The [Eye-Fi] screen appears.

2Use the four-way controller (23) to select [Eye-Fi Communication], and press the four-way controller (5).

3
	Use the four-way controller (23)
		Eye-Fi
	to select the action, and press the
		Eye-Fi Communication
	4button.	Communication Info
		Automatically transfers
		unsent images from memory card
		MENU Cancel	OK OK

AUTO	Images that have not been transferred will be transferred
	automatically. Images will also be transferred when images
	are taken, new images are saved, or images are overwritten.
SELECT	Transfers the unsent images on the card that are
	selected in playback mode (p.229).
OFF	Turns off the wireless LAN function.

4Press the 3button twice.

The screen that was displayed before selecting the menu item appears again.