• If no operations are made within 1 minute in the control panel, the camera returns to standby mode.

•You can change the display color of the status screen and control panel. Set in [LCD Display] of the [RSet-up 1] menu. (p.212)

Shooting Info Display

If you press the Mbutton while the control panel is displayed, you can select the type of information displayed in standby mode for when shooting with the viewfinder. Use the four-way controller (2345) to select a display type and press the 4button.

Screen

Displayed Information

Display

 

 

 

 

 

 

Status

Displays the settings for shooting with the viewfinder. (p.25)

Screen

 

 

 

 

 

 

 

Displays the camera angle. A bar scale

 

 

 

 

 

 

 

 

 

 

 

 

indicating the horizontal camera angle

 

 

 

 

 

 

 

 

 

 

 

 

appears at the bottom of the screen, and a

 

 

 

 

 

 

bar scale indicating the vertical camera

 

 

 

 

 

Electronic

angle appears on the right side. If the

 

 

 

 

 

camera angle cannot be detected, both

 

 

 

 

 

Level

 

 

 

 

 

ends and the center of the bar scales flash

 

 

 

 

 

 

red.

Example: Tilted 1.5° to

 

 

Press the shutter release button halfway to

 

the left (yellow)

 

return to the status screen.

 

Vertically level

 

 

 

(green)

 

 

 

 

 

 

 

Display Off

Nothing is displayed on the monitor.

 

 

 

 

 

 

 

 

 

 

 

 

 

The current latitude, longitude, altitude, direction, and Coordinated

Electronic

Universal Time (UTC) are displayed. Press the shutter release button

halfway or turn the camera off and on again to return to the status screen.

Compass

Available only when the optional GPS unit is attached to the camera

 

 

and is operating. (p.269)

 

 

 

 

 

 

 

 

 

 

 

 

The Shooting Info Display selection screen is not displayed when the mode dial is set to C.

• If Electronic Level or Display Off is selected, the display setting returns to the status screen when the camera is turned off and on again. If you select the check box for [Shooting Info Display] in [Memory] of the [ARec. Mode 4] menu, the selected screen display appears the next time the camera is turned on. (p.218)

•The Live View image and the indicators which provide shooting information are displayed during Live View shooting. If you do not want to display the indicators, you can change the setting in [Live View] of the [ARec. Mode 4] menu. (p.107)

29

1

Using Before

Camera Your