5

About the Battery and Charger

•To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.

•If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.

•Charging the battery a day before use or on the day of use is recommended.

•The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC109. Do not use it with other devices.

Precautions on Carrying and Using Your Camera

•Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.

•Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.

•The temperature range for camera use is -10°C to 40°C (14°F to 104°F).

•The monitor may appear black at high temperatures, but will return to normal at normal temperatures.

•The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.

•Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperature of the camera and surroundings are equalized.

•Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.

•Do not press the monitor with excessive force. This could cause it to break or malfunction.

•Be careful not to overtighten the screw in the tripod socket when using a tripod.

Cleaning Your Camera

•Do not clean the camera with organic solvents such as thinner, alcohol, or benzine.

•Use a lens brush to remove dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens.

•Please contact a PENTAX Service Center for professional cleaning of the CMOS sensor. (This will involve a fee.)

•Periodic inspections are recommended every one to two years to maintain high performance.

Storing Your Camera

•Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove the camera from its case and store it in a dry and well-ventilated place.