Set the wireless mode of the external flash directly connected to the camera to [MASTER] or [CONTROL].
1
Using a Combination of External Flash Units
Set the camera flash to rmode, and press the K/i button.
Remove the external flash unit after the channel is set on the camera, and place it at the desired location.
1
2
3 Confirm that both flashes are fully charged and then take a picture.
Wireless Shooting
Using a Combination of the Built-in Flash and an External Flash Unit

MASTER

Sets the camera to discharge both the flash directly

connected to the camera and the wireless flash unit.

 

 

 

CONTROL

Sets the camera to discharge the flash directly connected

to the camera as a control flash only, not as the main flash.

 

2 On the wireless remote flash unit, set the wireless flash mode to [SLAVE] and set the channel to the same channel as the flash directly connected to the camera. Then, place it at the desired location.

3 Confirm that both flashes are fully charged and then take a picture.

• The Shake Reduction function is automatically turned off in wireless mode.

•When using multiple AF540FGZ/AF360FGZ external flashes and performing high-speed flash sync shooting in wireless mode, set the flash directly connected to the camera to high-speed flash sync mode.

185

5

the Using

Flash