Use a brush-less blower to remove dirt and dust from the CMOS sensor. Using a blower with a brush may scratch the CMOS sensor. Do not wipe the CMOS
sensor with a cloth.
6 Turn off the camera.
7 Attach the lens after the mirror returns to its original position.
Clean the CMOS sensor.
5
4 Use the four-way controller (23) to select [Mirror Up] and press the 4button.
The mirror is locked in the up position.
If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the Dust Alert image appears on the monitor. Clean the sensor while checking the location of the dust.
319
Sensor Cleaning
Raises mirror and opens shutter
for access to clean sensor. Turn the power off to finish
Mirror Up
Cancel
OK OK
11
Appendix