328Troubleshooting

11

Appendix

In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the battery out and putting it back in again. When the mirror remains in the up position, take the battery out and put it back in again. Then, the mirror will retract when the camera is turned on again. After these procedures are done, if the camera operates correctly, it does not require any repairs.

We recommend checking the following items before contacting a service center.

Problem

Cause

Remedy

 

Battery is not

Check if battery is installed. If not, install a

 

installed

fully charged battery.

The camera

Battery is not

Check the orientation of battery.

does not

installed properly

Re-insert battery according to the +/–

turn on

symbols. (p.45, p.46)

 

 

 

 

 

The battery power is

Replace with a charged battery or use the

 

low

AC adapter kit K-AC109 (optional). (p.50)

 

 

 

 

The lens aperture

Set the lens aperture ring to the sposition

 

(p.104) or select [Permitted] in [22. Using

 

ring is set to other

 

Aperture Ring] of the [ACustom Setting 4]

 

than the sposition

 

menu. (p.314)

The shutter

 

 

 

The built-in flash is

Wait until charging is finished.

cannot be

charging

released

 

 

 

There is no available

Insert an SD Memory Card with available

 

 

space on the SD

space or delete unwanted images. (p.52,

 

Memory Card

p.84)

 

Recording

Wait until recording is finished.

 

 

 

 

 

Autofocus cannot focus well on subjects

 

 

that have low contrast (the sky, white walls,

 

 

etc.), dark colors, intricate designs, rapidly-

Autofocus

The subject is

moving objects or scenery shot through a

does not

window or a net-like pattern. Lock focus on

difficult to focus on

work

another object located at the same distance

 

 

 

as your subject, then aim at the target and

 

 

press the shutter release button fully.

 

 

Alternatively, use manual focus. (p.134)