*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the sposition.

*2 Lenses with a maximum aperture of F5.6 or faster.

*3 When using the built-in flash and AF540FGZ, AF360FGZ, AF200FG or AF160FC.

*4 Aberration correction is available in [Lens Correction] of the [ARec. Mode 3] menu. The [Distortion Correction] setting is disabled when using a DA 10-17mm FISH-EYE lens.

*5 Only available with compatible lenses.

*6 To use an FA/F SOFT 85 mm F2.8 lens or FA SOFT 28 mm F2.8 lens, set [22. Using Aperture Ring] in the [ACustom Setting 4] menu to [Permitted]. Pictures can be taken with the aperture you set, but only within manual aperture range.

*7 Only available with compatible lenses (FA 31mm F1.8 Limited, FA 43mm F1.9 Limited, or FA 77mm F1.8 Limited).

*8 The focusing area is fixed to O(Spot).

*9 c(Aperture Priority) Automatic Exposure with the aperture open. (Adjusting the aperture ring has no effect on the actual aperture value.)

Lens names and mount names

DA lenses with an ultrasonic motor and FA zoom lenses with power zoom use the KAF2 mount. DA lenses with an ultrasonic motor and no AF coupler use the KAF3 mount.

FA single focal length lenses (non-zoom lenses), DA or DA L lenses without an ultrasonic motor and D FA, FA J and F lenses use the KAF mount.

Refer to respective lens manuals for details. Note that this camera is not equipped with a power zoom function.

Lenses and accessories that cannot be used with this camera

When the aperture ring is set to other than the s(Auto) position or a lens without an sposition or accessories such as an auto extension tube or auto bellows are used, the camera will not operate unless [22. Using Aperture Ring] is set to [Permitted] in the [ACustom Setting 4] menu. Refer to “Notes on [22. Using Aperture Ring]” (p.314) for restrictions that apply.

All camera capture modes are available when using DA/DA L/FA J or lenses with an aperture sposition set to the sposition.

Lens and Built-in Flash

313

11

Appendix

The built-in flash cannot be regulated and fully discharges when A lenses not set to the s(Auto) position, pre A lenses or soft focus lenses are used. Note that the built-in flash cannot be used as an Auto Flash.