Direct Printing Using PictBridge

By connecting the camera to a printer that supports PictBridge using the USB cable (I-USB7) supplied with the camera, you can print images directly from the camera without using a PC. Select the images you want to print and the number of copies on the camera after it has been connected to the printer.

•You are recommended to use the AC adapter kit D-AC8 (optional) while the camera is connected to the printer. The printer may not work properly or the image data may be damaged if the battery runs out of power while the camera is connected to the printer.

•The focus status lamp and flash status lamp blink slowly while data is being transferred from the camera to the printer.

•Do not disconnect the USB cable during data transfer.

•Depending on the type of printer, not all the settings made on the camera (such as image quality and DPOF settings) may be valid.

Connecting the Camera to the Printer

1 Select [PictBridge] for [USB Connection Mode] on the [BSet-up] menu.

1“Changing the USB Connection Mode” (p.119)

2 Connect the camera to the printer using the USB cable supplied with the camera.

All Images

The PictBridge menu appears. 1 Image

Print w/DPOF settings

OK OK

6 Playback/Deleting/Editing

103