2

1

RBCFGH<ISLNKJWKVWDE

Using the Remote Control Unit (optional)

You can switch the Drive mode to Remote Control mode and take pictures using the remote control unit (optional).

1

Press the four-way controller (2)

 

112

 

in Capture mode to display ior h

 

 

on the LCD monitor.

 

 

The self-timer lamp blinks slowly and the

 

2

camera is ready to take the picture.

04/14/2004

Press the shutter release button

12:00

 

 

on the remote control unit.

iThe self-timer lamp blinks quickly and the picture is taken after approximately three seconds.

h The picture is taken immediately.

Focusing may be compromised if you move the camera while the self-timer lamp is blinking.

•The buttons on the camera can be used in the normal way.

•Ensure that the remote control unit is no more than four meters away from the front of the camera.

Life of the Battery for the Remote Control Unit

A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTAX customer service center if the battery needs changing. (A charge is made for changing the battery.)

4 TakingPictures

61