4 TakingPictures

If you take a picture while looking through the viewfinder when the focus mode is set to Macro or Super Macro, the range of the resulting picture will differ from what was seen in the viewfinder. Be sure to check the image on the LCD monitor.

Manual Focus

When the mode is set to z (Manual Focus), the central portion of the picture is enlarged to full screen on the LCD monitor for focus adjustment. Use the four-way controller (23) to adjust the focus while watching the indicator on the LCD monitor.

 

2

For distant focus

 

 

 

 

 

 

3m

 

 

 

 

 

 

 

1

 

For closer focus

 

0.3

 

 

.18

04/14/2004

 

 

 

 

 

 

 

 

 

 

12:00

 

 

 

 

 

 

 

 

 

 

 

Indicator

After the focus is set, press any button except the four-way controller (23) or take your finger off the four-way controller (23). The screen returns to the normal display about two seconds later.

When focusing, hold down the four-way controller (23) to focus quickly.

Changing the Focusing Point

In Autofocus mode, you can change the focusing point by moving the focus frame.

1 In u(Focusing Area) mode, press the four-way controller (2345).

Moves the focus frame [ ] (Focusing area).

2 Press the shutter release button halfway.

The focus frame is fixed in its new position.

To return the focus frame to its original location, press the qsz button again.

Troubleshooting “Subject is not in focus” 1p.131

70