Peripheral Electronics Aux2Car instruction manual Car radio

Models: Aux2Car

1 24
Download 24 pages 30.31 Kb
Page 17
Image 17

TROUBLE SHOOTING

Symptom

Cause

No Power

Blown fuse

No Power

Bad connection

Alternator noise is heard

Wrong wiring creates

(Changes with gas)

ground loop.

Radio can’t recognize

Bad cables or cables are

Aux2car adaptor

not connected properly

 

between converter box and

 

car radio

Aux2car adaptor suddenly is

Bad connection or loss of

not recognized any more

power to interface

Radio can’t recognize

Wrong selection on dip

Aux2car adaptor

switch in the converter box

CHAPTER3

Remedy

Replace fuse with same amp. Rating. If the fuse blows again, call tech support.

Check cable connection.

Call tech support or ask a local car audio shop.

Check connection and cables, push in fi rmly.

Unplug the black converter box from Radio and plug again

Select the right protocol for you car. (See Page 3)

For technical support call 800-477-2267 9:30 am-6pm EST. MON - FRI

15

Page 17
Image 17
Peripheral Electronics Aux2Car instruction manual Car radio