VEHICLE INSTALLATION
CHAPTER2
Vehicle Installation
In this chapter you will learn how to install the Aux2Car adaptor in specifi c vehicles.
The Aux2Car adaptor connects to your car radio using a vehicle specifi c cable harness. Browse to the specifi c section for your vehicle to learn what cable you need and how to set up the Aux2Car and install in your vehicle. Below is an overview of all Aux2Car settings.
Dip-Switch Overview
The dip switches can be found on the side of the Aux2Car. Switches are in the “ON” position when they are switched DOWN. Aux2Car settings for each vehicle can be found on the vehicles installation page. Refer to the index to find the page number that covers your vehicle.
Programming Dip Switch settings Quick Reference
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
Acura | on | off | off | on | off | off | off | on | |
Audi/VW | on | off | off | off | off | off | off | on | |
Ford | off | on | off | off | off | off | off | on | |
Ford Focus | on | on | off | off | off | off | off | on | |
GM E&C | off | off | on | off | off | off | off | on | |
GM Class 2 | on | off | on | off | off | off | off | on | |
GM XM | off | on | on | off | off | off | off | on | |
Chrysler new | off | off | off | on | off | off | off | on | |
Chrysler | on | off | off | on | off | off | off | on | |
old/Honda | |||||||||
|
|
|
|
|
|
|
| ||
Toyota | on | on | off | on | off | off | off | on |
Please consult vehicle specific section for important installation instructions
3
