VEHICLE INSTALLATION
Ford (Ford, Lincoln, Mercury)
Before connecting any cables to the Aux2Car you must set the dip switches to the correct position. If you set the
if you use PXHFD1, PXHFD2 make sure that you connect the Black wire to ground and the Yellow wire to constant 12V+. *If you don’t know the location of constant 12V+, please use a Volt meter, or consult a Ford dealership.
DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE Aux2Car !!!
SETTINGS FOR FORD | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
FOCUS & COUGAR | on | on | off | off | off | off | off | on | |
SETTINGS FOR ALL | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
OTHERS | |||||||||
off | on | off | off | off | off | off | on | ||
|
See the next page for a full list of vehicles as well as plug location in each.
OPERATION
Switch to the Aux2Car adaptor by pressing the “CD” button on the radio.
If you would like to connect Aux2Car adaptor to 2004 - Town Car,
Grand Marquis, Marauder, LS and Ford Crown Victoria, please see
Ford appendix, page 19.
6
