TFTP Commands
106 IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7

Show SNMP

TFTP Commands

Set Server TFTP

Hosts Commands

Add Host

Delete Host

Description Shows SNMP settings, including communities and traps.
User Level Admin
Syntax show snmp
Description Configures the IOLANs TFTP client settings.
User Level Admin
Syntax set server tftp [retry <integer>] [timeout <integer>]
Options retry
The number of times the IOLAN will retry to transmit a TPFT packet to/from a host
when no response is received. Enter a value between 0 and 5. The default is 5. A value
of 0 (zero) means that the IOLAN will not attempt a retry should TFTP fail.
timeout
The time, in seconds, that the IOLAN will wait for a successful transmit or receipt of
TFTP packets before retrying a TFTP transfer. Enter a value between 3 and 10. The
default is 3 seconds.
Description Adds a host to the IOLAN host table.
User Level Admin
Syntax add host <hostname> <IP_address>
add host <hostname> fqdn <text>
Options <hostname>
The name of the host.
<IP_address>
The host IPv4 or IPv6 address.
fqdn
When you have DNS defined in the IOLAN, you can enter a DNS resolvable fully
qualified domain name (note: FQDN’s are excluded as accessible hosts when IP
Filtering is enabled).
Description Deletes a host from the IOLAN host table.
User Level Admin
Syntax delete host <config_host>
Option <config_host>
You can see a list of hosts that can be deleted by typing delete host ?.