Perle Systems MDC, SDS manual Show Line Users, Authentication keyboard-interaction, Ssh-1-cipher

Commands for Users Logged Into the IOLAN

Show Line Users

Description	Shows the users who are on the line.
User Level	Admin
Syntax	show line users

SSH

Description	Starts an SSH session to the specified host/IP address.
User Level	Normal, Admin
Syntax	ssh <hostname/IP_address> [<TCP_port>]
	[termtype <terminal_name>] [authentication rsa onoff]
	[authentication dsa onoff]
	[authentication keyboard-interactive onoff]
	[compression onoff] [protocol ssh-1ssh-2ssh-2,1]
	[ssh-1-cipher 3desdesblowfish]
	[ssh-2-cipher-list <3des blowfish cast aes arcfour> end-list]
	[user <name>] [verbose onoff]
Options	<hostname/IP_address>
	The name (resolvable via DNS) or IP address of the host you wish to connect to with
	SSH.
	<TCP_port>
	The port number the target host is listening on for incoming connections. The default
	for SSH is port number 22.
	termtype
	Type of terminal attached to this line; for example, ANSI or WYSE60.
	authentication rsa
	An authentication method used by SSH version 1 and 2. When enabled, an SSH client
	session will try to authenticate via RSA.
	authentication dsa
	An authentication method used by SSH version 2. When enabled, an SSH client session
	will try to authenticate via DSA.
	authentication keyboard-interaction
	The user types in a password for authentication.Used for SSH2 only.
	compression
	Requests compression of all data. Compression is desirable on modem lines and other
	slow connections, but will only slow down things on fast networks.
	protocol
	Specify whether you are using SSH-1, SSH-2, or a combination of the two protocols,
	SSH-2, SSH-1.
	ssh-1-cipher

Select the encryption method (cipher) that you want to use for your SSH version 1 connection:

z3DES

zBlowfish

User Commands 55