Models BBR/BBS Installation & Operation Manual
Problem | Cause | Solution |
System runs for long period of | Condenser dirty or obstructed. | Clean condenser and clear obstruction. |
time. | Door kept open for long time or opened | Wait 24 hours and recheck temperature. |
| more frequently. | Reset preset temperature if necessary. |
| Warm product place in cabinet recently. | Normal for system to run more frequently. |
| Hot day and warm room temperature. |
|
Condensation forms inside the | High humidity and/or frequent door | Normal operation. |
compartments. | opening. |
|
| Door not closing and sealing properly. | Make sure door is closing properly. Check |
|
| door seals and replace if necessary. |
Condensation forms on outside | High humidity and/or frequent door | Normal operation. |
of unit. | opening. |
|
| Door not closing and sealing properly. | Make sure door is closing properly. Check |
|
| door seals and replace if necessary. |
|
| If condensation persists, contact your selling |
|
| dealer. |
For Product Information
•Contact your selling dealer.
•Inquire via the web at www.perlick.com
•Call (800)
•Write to Perlick Corporation, Customer Service Department, 8300 West Good Hope Road, Milwaukee, WI 53223.
•Email us at warrantyserv@perlick.com.
For Product Service
•Check the model and serial number of your unit located on the label attached to the inside top of the cabinet.
•Inquire via the web at www.perlick.com, or call (800)
For Replacement Parts and Accessories
•Use only genuine Perlick replacement parts and accessories. Genuine Perlick parts and accessories are designed to work correctly with Perlick products and offer superior service life. The use of
•Check the model and serial number of your unit which is located on the right or left interior panel. Call your Perlick Factory Authorized Service Center.
•Inquire via the web at www.perlick.com, or call (800)
Printed in USA | 13 | 0213 |
