Perlick BBRN, BBSN Shelving Adjustment, CAUTION Completely empty shelf or drawer before removing

Models BBRN/BBSN Installation & Operation Manual

10.Attach the top and bottom door hinges using screws removed in step 6 (Figure 9).

11.Place lower V-block into lower cabinet hinge with notch parallel to cabinet (Figure 10).

Top hinge

and screws

Bottom hinge

and screws

Figure 9. Door Hinges

V-block parallel to cabinet

TOP VIEW

Figure 10. Installing V-Block

12.Lift door assembly and insert top pin into bearing. Move door toward cabinet and align V-blocks (Figure 11).

13.Insert and tighten lower hinge pin to complete assembly.

Insert top pin

into bearing

Insert and tighten hinge pin

Figure 11. Installing Door

Shelving Adjustment

See Figure 12.

CAUTION Completely empty shelf or drawer before removing.

1.Open the door. Tilt the shelf and remove it from the unit

2.Reposition each bracket separately. Grasp the middle of the bracket, pull the front end up and out, then forward to remove it.

3.Place brackets at desired location and reinstall shelf(s).

Figure 12. Shelf Bracket

Printed in USA 8 0213