Measure front of opening from floor surface to bottom edge of countertop
Measure at both rear corners of unit from floor surface to bottom of countertop
Figure 4. Leveling the Unit
5). Check interior door openings to make sure the unit is level and square. Install shelving and/or drawers. Place the slide brackets squarely into the bracket grooves. When installed properly, a “click” should be heard from the slide bracket retaining tabs and the brackets should slide smoothly. The retaining tabs will stop the shelf/drawer when pulled out to full extension.
6). Turn on the power to the wall outlet at the circuit breaker.
NOTE: Improper shelf/drawer installation may not actuate slide mechanism.
PERLICK RESIDENTIAL INSTALLATION MANUAL
TOE PLATE INSTALLATION
Once the unit is secured in place, install the louvered toe plate. Secure the plate by snapping the latch into the latch catch on the unit (Figure 5).
CAUTION The toe plate must be removed to service the unit. The floor cannot interfere with removal, and the louvered sections
must not be covered or obstructed. Obstructions could prevent proper air circulation, which may damage the unit.
NOTE: To achieve maximum performance, interior louver openings and fan guard openings should never be obstructed.
Latch
Strike
Latch
Figure 5. Toe Plate Installation
perlick.com 7
