PERLICK RESIDENTIAL INSTALLATION MANUAL
WOOD OVERLAY INSTALLATION (FOR -2 AND -4 MODELS)
Before beginning installation, check all components for proper fit and finish.
Scan the QR code to the right with your smart phone to watch a detailed
CAUTION All overlay doors require a trim panel of at least 3/4” thick. The solid wood and glass wood panels should not weigh
more than 10 lbs.
WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts. Unfinished solid hardwood fronts are optional and can be removed and replaced with other wood to match your cabinetry. See Figure 18 and 19 for wine rack face details.
NOTE: The unfinished faces should be finished and sealed. In many cases, stains and/or finishes have odors that may be objectionable in an enclosed area. Do not stain or finish wood faces while installed on unit. To remove the front wood face from the wine shelf, simply pull out the wine shelf and remove the fasteners, finish as desired, and when completely dry, reinstall with fasteners.
1.With the unit secured in position, open the door and make sure panel
2.Loosely attach four corners of overlay panel to the door using #10 x 1” wood screws, installed through the door frame from the rear.
3.Check for overall wood overlay panel fit, position, and function. Make minor adjustments as necessary. When panel is properly aligned, tighten mounting screws securely. Install the rest of the mounting screws and tighten securely.
CAUTION Do not overtighten wood overlay attachment screws, as this may
damage the factory supplied door frame.
| |
| | | |
| |||
|
|
|
|
Figure 18. Wine Rack Trim, 15” models
| |
|
|
| |
| | |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
| |
Figure 19. Wine Rack Trim, 24” models
12perlick.com
