10
Caution!
Input D (HT Loop) fixes the output to 0dB,
as it is a home theatre bypass.
Please ensure the level is suitably attenuated by the upstream processor
or receiver before selecting this input.
Note:
The source selecto
r has six positions and supplies the chosen source to
the Pre/Balanced outputs and Tape outputs. If source
input E or F is
selected, no signal is supplied to its applicable Tape
output to avoid the
potentially damaging feed back loop which can occur if in
advertently
attempting to record and playback the same source simultaneously.
Mute
Pressing the buttons simultaneously will mute the volume
, indicated by “M U”
on the display. M ute can be cancelled by pressing the buttons simultaneously
again, or increasin
g the volume setting. The volume setting can be decreased
whilst the volume remains muted.
Note:
The mute function still operates when
source input D (home theatre
bypass) is selected.
Refer to Chapter 5 “Remote Control Functions”, for further details
on source
select and mute controls.