9
3
33
3
Front Panel Functions
Volume Control and Standby
Volume Control
When either button is depressed, they
will alter the volume setting. The volume
adjustment range is 00 – 59 (-95dB to +18dB), with 47 indicating 0dB.
Standby
Pressing simultaneously will put the SM 6 into standby,
disconnecting all power
supplies except the digital power supply for the microcontroller and turning off
the remote trigger outputs. The selected input and balance settings are saved.
Standby is indicated by a single dot on the display and operation can be resumed
by pressing buttons simultaneously again.
Refer to Chapter 5 “Remote Control Functions”, for further details on volume
and standby controls.
Alphanumeric Display
The display will illuminate when the power is turned on at the mains power
switch or when various remote or front panel adjustments are made. At turn-
on,
the display will illuminate with 00 and default to the input
selected at the last
standby cycle.
Source Select and Mute
Source Select
When either button is depressed, they scroll through the source inputs.
The order of source inputs and display indication is as follows:
Source Input Display
Input A IA
Input B IB
Input C IC
Input D (HT Loop) HT
Input E IE
Input F IF