Pfaff 2170 owner manual Placing single stitches, To move single stitches

V

Placing single stitches

For each additional stitch you want to place, touch the confirm icon (E).

To move single stitches

With your stylus or your finger you can work with your stitches directly on the work space by dragging and dropping a selected stitch point. To position a stitch point just touch it on the screen and drag it to the desired position. When you do this you will change the stitch width

Eand the stitch length of the selected stitch.

Another way to move the stitch point of a selected stitch and for fine adjustment is to use the stitch length (T) and stitch width icons (U).

	The last stitch of the sequence is marked with blue and the last stitch
T	point is marked with a red frame.
U	The dotted line, the cursor line (V), at the end of the last stitch shows
	where the following stitch will be added (if the x-coordinate of the last
	stitch is not the same as the first stitch). This ensures that the fabric is
	fed evenly when you sew out your stitch pattern.
	If you place the last stitch exactly at the same position (x-coordinate)
	as the first one of your stitch pattern the dotted cursor line will not be
	sewn.
	Touch the Start sewing (E) to open the sewing menu.
	Now you can see the whole sequence of your stitch pattern and sew it.
	Only when this screen is open you can sew out your stitch pattern.
	Touch ESC to return to the Stitch Creator menu, for further editing.

D e c o r a t i v e s e w i n g

4:13