19
8.5.4
The mouse arrow is out of alignment…
The mouse arrow does not point to the center of icon as you intend.It might be due to the
viewing angle or the stylus may require calibration.
8.5.5
Users accustomed to a mouse device use a right click for quick access to command options of an
object.
The stylus pen offers a similar command function. Here's how:
1. Move the mouse arrow to the center of the object.
2. Hit and hold the object.
3. Available command options are displayed.
8.6 Is MS Transcriber supported by RDP?
RDP service does not support handwriting input using MS Transcriber.You can use the on-screen
keyboard for input.
8.7 How do I use the on-screen keyboard?
8.7.1
Open the on-screen keyboard.You can use the Input Panel button to open up / turn off the on-
screen keyboard. This button is located at the lower right side of the pad.
8.7.2
Change to the larger keyboard.You can choose between the regular or an enlarged keyboard.Go
to Control Panel then tap on Input Panel to choose Keyboard or LargeKB.
8.8 How do I use a password to protect my data on 100WT10P?
You can use a password to protect your data. Here's how:
1. To setup,tap the PASSWORD icon on the Control Panel
2. Enter the password you have selected
3. Enter the password again to confirm your password.
You can enable password protection at Power On or Screen Saver.
CAUTION: If you forget your password,you must perform a full reset or a Hardware reset
according to the manufacturer's instructions.Performing a full reset or a Hardware reset erases all files
and data that you have created,and programs you have installed (Hardware reset will NOT delete files
or data in IPSM directory).
8.9 Is Cisco LEAP supported?
Philips supplies a third-party proprietary solution for LEAP authentication and web encryption which
will work natively with our internal 802.11b solution. Alternatively,an external Cisco wireless network
adapter (e.g.Aironet 340 or 350 series adapter) can be added to the system to achieve LEAP support.
8 TROUBLESHOOTING