TECHNICAL SUPPORT (FAQ)
|
| Problem & Question | Possible Solution |
|
| Power LED is not on | *Check if the Power Switch is in the ON |
|
|
| position |
|
|
| *Power Cord should be connected |
|
| No Plug & Play | *Check if the PC system is Plug & Play |
|
|
| compatible |
|
|
| *Check if the Video Card is Plug & Play |
|
|
| compatible |
ENGLISH |
| *Check if the | |
| Cable is bent | ||
|
|
| |
|
|
| *Make sure the Monitor Drivers are |
|
|
| installed |
|
|
| |
|
| Picture is fuzzy | *Adjust the Contrast and Brightness |
| |||
|
|
| Controls. |
|
| Picture bounces or a wave | *Move electrical devices that may cause |
|
| pattern is present in the | electrical interference. |
|
| picture |
|
|
| The power LED is ON | *Computer Power Switch should be in the |
|
| (Orange) but there’s no video | ON position. |
|
| or no picture. | *Computer Video Card should be snugly |
|
|
| seated in its slot. |
|
|
| *Make sure monitor’s video cable is |
|
|
| properly connected to the computer. |
|
|
| *Inspect monitor’s video cable and make |
|
|
| sure none of the pins are bent. |
|
|
| *Make sure computer is operational by |
|
|
| hitting the CAPS LOCK key on the |
|
|
| keyboard while observing the CAPS |
|
|
| LOCK LED. The LED should either turn |
|
|
| ON or OFF after hitting the CAPS |
|
|
| LOCK key. |
|
| Missing one of the primary | *Inspect the monitor’s video cable and |
|
| colors (RED, GREEN, or | make sure that none of the pins are bent. |
|
| BLUE) |
|
10 |
