Philips 107S63, 107S61 user manual Video cable, Connecting Cables Power Cord Signal Cable

Video cable

Connecting the Video Cable: the monitor comes with a built-in video cable. Plug the signal cable′s 15-pin connector into the computer's video port and tighten the two screws on the cable connector.(see figure 2)

Caution:Don’t bend the signal cable, otherwise it will break the inner wire. Connecting the Power Cord: Plug the power cord into the monitor's AC power jack. Then plug the power cord into a grounded AC outlet, UL- approved power strip, or the power output socket on your PC.

Caution: If the AC outlet is not grounded (only two holes), install the proper grounding adapter (not supplied).

ENGLISH

Figure 2 Connecting Cables

1.Power Cord

2.Signal Cable

41C779-813-1A 英文 4