The OSD Controls
5) To degauss your screen, press the | button. Your screen will be degaussed, then the MAIN |
CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
Smart | . . . to continue to ADJUST MOIRE, press the | button until EXTRA CONTROLS is |
Help | highlighted. Next, start with step 3 under EXTRA CONTROLS, ADJUST MOIRE. | |
. . . to exit completely, press the 
button.
ADJUST MOIRE (Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern arising from the interference between two superimposed line patterns. To adjust your moire, follow the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be affected.
1)Press the 
button on the monitor. The MAIN CONTROLS window appears.
2)Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted.
file:///D/Rita/LF3/lf3manual/english/OSD/osd_cont.htm (22 of 27) [2002/7/10 ?? 02:46:37]
