4ENGLISH

IMPORTANT SAFETY

INSTRUCTIONS

When using an electric appliance, basic precautions should always be followed, including the following:

Read all instructions before using this appliance.

DANGER

To reduce the risk of electric shock:

1.Do not reach for a corded Jet Clean System/charging stand that has fallen into water. Unplug immediately.

2.Charging stand is not for immersion or for use in shower.

3.Do not use an extension cord with this appliance.

4.Do not place or store a Jet Clean System/charging stand where it can fall or be pulled into a tub or sink. Do not place or drop a Jet Clean System/charging stand into water or other liquid.

5.Always unplug this Jet Clean System/charging stand from the electrical outlet immediately after use, except when razor is (re)charging.

6.Unplug and remove power supply cord from Jet Clean System/ charging stand before cleaning.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

1.Close supervision is necessary when this razor/Jet Clean System/ charging stand is used by, on, or near children or invalids.

2.Use this razor/Jet Clean System/charging stand for its intended household use as described in this manual. Do not use attachments or a cleaning solution not recommended by Philips Electronics North America Corporation.

3.Never operate this razor/Jet Clean System/charging stand if it has a damaged cord or charging plug, if it is not working properly, if it has been dropped or damaged, or dropped into

ENGLISH 5

water while plugged in. For assistance call 1-800-243-3050.

4.Keep the razor, Jet Clean System, charging stand, cord and charging plug away from heated surfaces.

5.Never drop or insert any object into any opening.

6.Do not clean, charge or plug in razor/Jet Clean System outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

7.Do not use this razor with a damaged or broken comb, as facial injury may occur.

8.Always put razor in Jet Clean System/charging stand first, attach cord to Jet Clean System/charging stand, then plug into outlet. Be certain plug is inserted firmly into Jet Clean System/charging stand, up to mark indicated on plug. To disconnect, turn Jet Clean System/charging stand off then remove charging plug from outlet.

9.Never put the razor/Jet Clean System/charging stand in direct sunlight or store at a temperature above 140°F.

10.Keep the Jet Clean System, charging stand and cord dry at all times. Do not handle with wet hands. Do not store in a damp environment.

11.To prevent possible damage to the cord, do not wrap cord around the razor or Jet Clean System/charging stand.

SAVE THESE

INSTRUCTIONS

IMPORTANT: The power plug contains a transformer. Do not cut off the power plug to replace it with another plug, as this will cause a hazardous condition.

Only use power plug supplied with the razor.

Only use Jet Clean System supplied with the razor.

Page 3
Image 3
Philips 1250XCC, 1260X, 1280XCC manual Important Safety Instructions