
16ENGLISH
ENGLISH 17
LEFT MINUTES
MINUTES LEFT
C◗ The lock symbol blinks on the display to indicate the appliance is in
Charge Meter
◗Charge Meter monitors amount of remaining battery power (Models 1260X, 1250X and 1250XCC) and actual shaving ‘minutes left’ (Models 1290X, 1280X and 1280XCC). ‘Minutes left’ or remaining battery capacity is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use
◗Initially your razor may need to go through 2 or 3 full charge/recharge cycles before ‘minutes left’ (Models 1290X, 1280X and 1280XCC) or remaining battery capacity indicators (Models 1260X, 1250X and 1250XCC) begins to display your accurate shaving minutes or battery power left.
Before First Use
◗Charge the razor before you start using it (see ‘Charging’). Make sure the razor is
switched off before you start charging it.
◗Remove any sticker or protective foil from the Display before using razor.
Important
◗Only use the power cord and charging stand or Jet Clean System (models 1280XCC and 1250XCC only) provided to charge the razor.
◗The power plug transforms 100-240V AC to less than 24V DC.
Travel Lock (1280X, 1280XCC, 1260X, 1250X and 1250XCC)
The razor is equipped with a travel lock function. You can use the travel lock function when you are going to store the razor for a longer period or if you are going to take the razor with you when traveling. See ‘Travel Lock’ section for instructions on how to use this function.
Charging
◗Charging, recharging or storing at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.
◗Always unplug this charging stand/Jet Clean System from the electrical outlet immediately after use, except when razor is (re)charging. You can store the razor in the charging stand or Jet Clean System.