Special installation functions
You can select one of the following installation functions in order to adapt your
Automatic TV channel search
Your
If you want to start the automatic TV channel search again, then follow the instructions below.
aPress the MENU button on the remote control. The main menu will appear.
b Select the line ’Installation’ with the |
| BP r | or | |||||
|
| button and confirm with the |
|
| button. | |||
| AP q | SqC | ||||||
c Select the line ’Autoinstall’ with the |
|
| or | |||||
| BP r | |||||||
|
| button. |
|
|
|
| ||
| AP q |
|
|
|
| |||
d Press the SqC button. The ’Automatic TV channel search’ starts.
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
eWhen the TV channel search is complete,
’Installation comp.’ will appear on the screen.
How to search for a TV channel manually, you can read in the section ’Manual TV channel search’.
DIf you have programmed a recording (TIMER), a
DAutomatic Channel Installation:
Some cable companies or broadcasters offer the possibility to install TV channels automatically with ’ACI’. Information about the installation offered and how to select it, will appear on the screen.
This set will recognize and install TV channels with ’ACI’ automatically.
TV channels will be stored from programme number 1 onward.
If ’ACI’ cannot identify a TV channel, you can search for it using the method as described in the section ’Manual TV Channel Search’.
Searching for new TV channels
aPress MENU . The main menu will appear.
b Select the line ’Installation’ with the BP r or AP q button and confirm with the SqC button.
cSelect the line ’Add new channels’ with the BP r or AP q button and confirm with the SqC button.
Channel search will start.
d To store the TV channel, press OK .
eRepeat step d, until you have found all desired TV
channels.
D If you have programmed a recording (TIMER), a
7
