Philips 14PV335/07, 14PV334/07, 14PV330/07 manual Manual TV channel search, Satellite receiver

Manual TV channel search

In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.

aPress the MENU button on the remote control. The main menu will appear.

b Select the line ’Installation’ with the							BP r	or
		button and confirm with the				button.
	AP q				SqC
c Select the line ’Manual store’ with the								or
							BP r
		button and confirm with the				button.
	AP q				SqC
	MANUAL STORE
	Channel/Frequency			FREQU.
	Search			123
	Fine tuning		(,,,,=,,,,$
	Name edit			xxx
	Programme number			01
	Decoder			OFF

ã Exit:

« press MENU

dIn the line ’Channel/Frequency’, select the display for:

’FREQU.’: frequency

’C CH’: channel

’S CH’: special channel

eIf you know the frequency or channel of the desired TV channel, you can enter the data in line ’Search’ with the digit buttons 0-9 .

DIf you don’t know the frequency or channel of the TV

channel of your choice, press the SqC button to start the channel search.

fIn the line ’Programme number’ select the programme number you want e.g.: ’01’, using the DSr or SqC button.

gIf you want to change the TV channel name, press the SqC button in line ’Name edit’.

E Select the character you want to change with the DSr or the SqC button. Change the character with the BP r or the AP q button. Select the next

character in the same way.

E To confirm the information, press the OK button.

hIf you want to change the automatic tv channel setting, select the line ’Fine tuning’.

With the DSr or SqC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.

iPress the OK button to store the TV channel.

D If you want to search for further TV channels, start again at step e.

jTo end, press the MENU button.

D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can’t select the function ’Manual store’.

Satellite receiver

You can receive channels from the satellite receiver via the

scart socket EXT. 1 .

To do this, select the channel number ’E1’ with the P p button. You will have to select the channels to be received by the satellite receiver on the receiver itself.

6