Philips 150P2G user manual Video

Product Information

VIDEO

•Video dot rate

•Input impedance

-Video

-Sync

•Input signal levels

•Sync input signal

•Sync polarities

•Input Frequency

•Video interface

AUDIO

80 MHz
75 ohm
2K Ohm
700m Vpp
Separate sync
Composite sync
Sync on Green
Positive and negative
XGA Hsync	48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync	35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync	31- 38 KHz, Vsync 60 - 76 Hz (N.I.)

Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are available. It can be switching via OSD selection.

• Input signal level	0.7 Vpp
• Headphone out signal level	32 Ohm 20+20mW
• Input signal connector	3.5mm mini jack
• Loudspeaker	2+2W stereo front firing (PMPO: 48W)

MICROPHONE

• Sensitivity	-55dB re 1V/ubar at 1KHz
• Output impedance	2.2K Ohm max.
• Directivity	-5dB at 180°
• Frequency range	300Hz-3KHz

OPTICAL CHARACTERISTICS

• Contrast ratio	300 (typ.)
• Brightness	250 cd/m2 (typ.)
• Peak contrast angle	6 o'clock
• White Chromacity	x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)

file:///D/Grace/150P2/english/150p2m/product/product.htm (2 of 9) [8/9/2001 11:27:54 AM]