Philips 15PF9969 operating instructions Activating the Sleeptimer, Activating the Active Control

ACTIVATING THE SLEEPTIMER

Sleeptimer function allows you to select a time period in which the set will switch to standby mode automatically upon reaching the selected time period. You have a choice of time period starting from OFF up to a maximum of 240 minutes

1.Press the (SLEEPTIMER) button to display the time period.

2.Press the (SLEEPTIMER) button repeatedly to cycle through the various time periods and select the

time period of your choice.

Note

•During the last minute of a Sleep time setting, an on-screen countdown will be displayed. Pressing any button on the remote control during the countdown will cancel the Sleep-timer.

•During the last 10 seconds of a Sleep timer setting, an on-screen display will read Goodbye.

SLEEP OFF

➠

SLEEP 240

ACTIVATING THE ACTIVE CONTROL

This feature automatically adjust settings for optimal picture quality continuously under any signal conditions. You have a choice of 4 modes : ACTIVE CONTROL OFF, ACTIVE CONTROL MIN, ACTIVE CONTROL MED and ACTIVE CONTROL MAX

HOW TO ACCESS AND SELECT THE ACTIVE CONTROL MODE

ACTIVE

1.Press the (ACTIVE CONTROL) button

CONTROL

repeatedly to cycle through the various four ACTIVE CONTROL modes and select your desired mode.

ACTIVE CTRL OFF

ACTIVE CTRL MIN

2. Press i (OSD) button to exit menu from screen or wait for the On-Screen Display to time out.

➠

ACTIVE CTRL MAX

35

15PF9936/69 p27-38 35 8/15/03, 1:47 PM