Philips 15PF9969 operating instructions PC Display Setup, Using the PC PICTURE-IN-PICTURE Feature

PC DISPLAY SETUP

When you are using the TV as a Computer Display, follow the procedures for PC Display setup. Note : Different Window versions may give different PC Display setup procedures.

1. Press PC (PC) button on the remote control to enter PC mode.

Note :The LCD TV will go on standby mode automatically within 5 seconds if no PC signal is detected.

2.Click on “Settings” on the Window Start menu.

3.Select “Control Panel”.

4.Click on “Display” and a display dialog-box will appear.

5.Navigate to the “Settings” tab on the display dialog-box.

6.Select the required “Colours and Resolution” and click “OK”.

7.Dialog-box “..Does Not Support..’ message will be displayed if set does not support settings.

USING THE PC PICTURE-IN-PICTURE FEATURE

Picture-in-Picturefeature allows you to call up a subscreen within your main screen.

	How to switch on the Picture-in-Picture Window screen
1.	Press PC	(PC) button on the remote control to enter PC mode.
2.	Press the	æ (PIP On/Off) button to switch on Picture-in-Picture screen (A large size

PIP screen appears).

3.Press the æ (PIP On/Off) button a second time to change PIP screen to a medium size.

4.Press the æ (PIP On/Off) button a third time to change to a small size.

5.Press the æ (PIP On/Off) buuton a fourth time to exit PIP screen.

Note : PC mode supports Picture-in-Picture with PC refresh rate not more than 60Hz.

How to position the Picture-in-Picture screen

2. In PC mode, press the æ (Picture-in-Picture On/Off) button to switch on Picture-in- Picture screen.

o

3.Press the (PIP Position) button repeatedly to position PIP screen to the position of your choice. (You can choose to position your PIP screen to be on the top left/top right/ bottom right or bottom left hand corner).

4.Press the æ (PIP On/Off) button three times to exit PIP screen.

44

15PF9936/69 p39-51 44 5/5/03, 2:14 PM