AUTO PROGRAM

AUTO PROGRAM

You can auto install programs on your TV This makes it easy for you to select only the TV stations in your area when the CH+ or CH– buttons are pressed.

NOTE : Ensure that the Antenna or Cable signal connection has been completed befo re AUTO PROGRAM is activated.

1Press the MENU button on the remote control to show the on-screen menu.

2Press the CURSOR < or > to scro ll through the on-screen menu until the word INSTALL is highlighted.

3Press the CURSO R > to display the INSTALL menu features.

4Press the CURSOR < or > to scroll through the Install features unti l the word TUNER MODE is highlighted.

5Press CURSOR > to start the Auto Program scanning of channels. Auto

Programming will store all available channels in the TV’s memory then tune to the lowest available channel when done.

6When finished, press the STATUS / EXIT button on the remote control to remove the menu from the TV’s screen.

Channel Edit

5Press CURSOR > to start the Auto Program scanning of channels. Auto Channel Edit

58

59

MENU

STATUS /

>>< >

EXIT

 

 

VOL

HELPFUL HINTS

When CABLE is selected, channels 1 - 125 are available.

When ANTENNA is selected, channels 2 - 69 are available.

When AUTO is selected, the TV will automatically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated.

16

Page 16
Image 16
Philips 20PT6446 user manual Helpful Hints, Press CURSOR to start the Auto Program scanning of channels. Auto