BASIC ANTENNA AND CABLE CONNECTIONS
Your home’s signal input might come from a single (75 ohm) round cable, a converte r box or from an antenna. In either case the connection to the TV is very easy.
1
2
If your Cable TV signal or Antenna signal
is a round cable (75 ohm) then you are ready
to connect to the TV.
If your antenna has flat twin lead wire
(300 ohm), you first need to switch the antenna wires to the screws of a 75 ohm adapter.
If you have a Cable Converter Box :
Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.
Connect the Cable TV cable or Antenna cable
(or 300 to 75 ohm adapter) to the 75Ω plug on the TV
If you have a Cable Converter Box : Connect
the OUT (put) plug from the Converter to the 75Ω plug on the TV.
Antenna Connection
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
300 to 75Ω |
| Back of TV |
Adapter |
|
|
1 | 75 | 2 |
Twin Lead
Wire
Round Cable
75Ω
Direct Cable Connection
Cable signal coming from Cable Company
HELPFUL HINTS
Back of TV
1
75
75Ω Round
Coaxial Cable
After using the Auto Program Control, press the
CH+ and - buttons to scroll through all the chan-Jack Panel Back of TV nels stored in the television’s memory.
5