Language
When there is no signal input to the TV, you may encounter instability of the screen display.
In this instance, please use the 
key to select an AV channel.
The Language feature is used to change the display language for menus.
&Press the MENU key.
éWith the cursor, select the Install menu and follow by the Language.
“Use the 
key to select a language of your choice.
‘To quit the menus, press 
.
(On screen display may differ from actual TV)
Tuner Mode (applicable to certain TV models only)
You can select Auto,Antenna or Cable modes with this menu.
&Press the MENU key.
éWith the cursor, select the Install menu and follow by the Tuner Mode.
“Use the
key to select either Auto,
Antenna or Cable
‘To quit the menus, press 
.
Auto Store (applicable to certain TV models only)
This menu is used to store all available channels automatically.
&Press the MENU key.
éWith the cursor, select the Install menu and follow by the Auto Store.
All the available TV channels will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of channels found.
At the end of the search, the menu disappears.
To exit or interrupt the search, press MENU. If no channels are found, consult the possible solutions on “TIPS” page.
6 | Operating instruction | Installation |
6 | 12/28/04, 10:52 AM |
