Philips 21PT2325 manual Channel edit, Auto, PAL, NTSC 3.58 or NTSC, BG, I, DK or M, Installation

Manual Store (applicable to certain TV models only)

This menu is used to store channels one at a time.

&Press the MENU key.

éWith the cursor, select the Install menu and follow by the Manual Store.

“Colour System: use theorkey to select the desired colour system;

Auto, PAL, NTSC 3.58 or NTSC 4.43.

‘Sound System: use the or key to select the desired sound system; Auto,

BG, I, DK or M.

(Search: Press MENU. The search starts. Once a channel is found, the scanning stops. Go to the next step.

If no picture is found, consult the possible

solutions (p. 14)

§Channel: enter the required channel

with the , or digit keys.

Fine Tune: if the reception is not

satisfactory, adjust using the or keys.

!Store: Press .The channel is stored. çRepeat steps ( to ! for each channel

you wish to store.

0To quit the menus, press .

Channel edit

This feature allows you to skip or edit channels which have bad or weak TV signal or channels you do not watch often.

Once a channel is skipped, you cannot have access to it by the Channel + or – key. You can only access the channels by the digit (0-9) keys.

(On screen display may differ from actual TV)

&Press the MENU key. The Main menu is displayed on the screen.

éWith the cursor, select the Install menu followed by the Channel Edit menu.

“Enter into the menu and select the channel number you wish to skip by the digit keys.

‘Then use thekey to select Skipped.

Use the key to select On.

(Repeat steps “ and ‘ for each channel you wish to skip.

§To quit the menus, press .

To restore skipped channels

&Repeat steps & to “ above.

éUse the key to select Skipped and

the key to select Off.

“Repeat steps & and é for each channel you wish to skip.

‘To quit the menus, press .

Installation Operating instruction 7

p3-7 7 12/28/04, 10:52 AM