Useprogrammed recording to automatically start andstop a
recordingat a later date.
Tomake a programmed recording, your TV-VIDEO Combi
needsto know:
*the date you want to make the recording;
*the programme number for the TV channel you want to
record;
*the start and stop time of the recording;
*whether you want to use VPS or PDC;
*the recording speed (SP/LP).
TheTV-VIDEO Combi stores all the information in a TIMER
block.You can programme up to 6 TIMER blocks a month in
advance.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
With’VPS and PDC’, the TV stationcontrols the start time and
thelength of the recording. This means that the TV-VIDEO
Combiswitches itself on and off at the right time even if a TV
programmeyou want to record begins earlier or finishes later
thanexpected.
Usuallythe start time is the same as the VPS or PDC time. But
ifyour TV guide gives a VPS or PDC time which is different to
theprogramme’s start time (for example, 20.15 and VPS 20.14),
youmust enter ’20.14’ as the start time.
Ifyou want to programme a time that is different from the VPS
orPDC time, you must switch off VPS or PDC.
Programming a recording (with ’VIDEOplus’)
Allthe information required for a programming is contained in
thePlusCode-programming number.
aPressthe TIMERsbutton on the remote control.
bSelectthe line ’Videoplus’ with the buttons Bor
Aandconfirm with the Cbutton.
cEnterthe entire PlusCode-programming number (up to 9
digits)printed in your TV guide next to the start time of a
TVprogramme.
Forexample, 5-234-89 or 5234 89
Enter523489 for the PlusCode-programming number.
Ifyou make a mistake, you can clear your instructions
withthe CLEAR button.
VIDEOPLUS
CODE REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
123456((( ONCE
0-9 Store:
press OK
dInline ’REPEAT’ select daily or weeklyprogramming
withthe Bor Abutton.
’Mo-Fr’:If you want to make a recording every day
fromMonday to Friday.
’Mo-Su’:If you want to make a recording every day
fromMonday to Sunday.
’WEEKLY’:If you want to make a recording every week
onthe same day of the week.
’ONCE’:If you want to make only one recording.
eConfirmwith the OK button. Your programming details
willthen appear on the TV screen.
TIMER PROGRAMMING VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã Exit: Start:
« press TIMER press è
DIfVIDEOPlus+ does not recognise the TV channel,
’P??’will appear on the TV screen. Instead of
’P??��,you can select the programmenumber you
wantwith the number buttons 0-9 .
DIf’Code error’ appears on the TVscreen, this
meansyou entered an incorrect PlusCode number
orthe incorrect date. Correct your instructions or
endwith the TIMERsbutton.
7. PROGRAMMED RECORDING (TIMER)15