Philips 241P4LRY user manual ErgoSensor, Hot Key Setting, Demo mode, How does it work?

4.ErgoSensor

4.ErgoSensor

Philips ErgoSensor is an innovative technology that advises users on how to sit in an ergonomically correct position at their computer. It uses a built-in sensor in the monitor to sense and measure the user’s behavior in terms of presence, posture and usage and then gives feedback for corrective actions.

Hot Key

Setting

You can turn the Philips ErgoSensor On or Off, and turn demo mode

On with a simple button on the bezel.

	Off
Demo mode
	Demo
ErgoSensor monitor has a built in demo mode to demonstrate how
the detection and notification message system works. Activation
method: (A) 15 degrees neck-tilt for angle detection. (B) 3mins for
time break activation. (C) >90cm and < 70cm for distance activation.

How does it work?

• Viewing distance

If user is found sitting outside of optimal ergonomic zone of 70- 90cm, a message is generated.

• Viewing angle

If user’s posture is detected with a neck angle tilted more than 15 degrees, a message is generated.

• Viewing time

If the user is found to be continuously using computer for more than one hour, a time break reminder is generated.

• Power saving
A. User detected on seat, monitor operates normally
B. If user is not detected on seat, monitor brightness	Watt	Watt
dimmed after 1 minute, saving power
C. Monitor turns off after 3 minutes, and then enters
standby mode, saving power
D. User returns to the seat, ErgoSensor returns monitor
to normal operation immediately..

25