Philips LFF 6050 Printing the functions guide, Printing the logs, Print / Functions List

LFF6050

Parameter	Signification
11 - RX speed	Transmission speed for incoming
	documents.
	For a quality telephone line
	(compatible, no echo),
	communications occur at
	maximum speed.
	However, it may be necessary to
	restrict the transmission speed for
	some calls.
12 - Rings	Number of rings to automatically
	start your machine.
13 - Discard size	The Discard Size parameter only
	defines the printing of received
	faxes. The number of lines of a
	document can be too high for the
	printing paper format. This
	parameter defines the threshold
	beyond which the extra lines are
	printed on a second page. Below
	this threshold, extras lines are
	deleted.
	If you choose ON, the threshold is
	set on 3 centimeters.
	If you choose OFF, the threshold is
	set on 1 centimeter.
20 - E.C.M.	This parameter helps correct the
	calls made on disturbed telephone
	lines. It is used when the lines are
	weak or too noisy. Transmission
	times may be longer.
25 - TEL Impedance	This parameter lets you choose
	between a complex impedance
	and a 600 Ohm impedance,
	depending on the telephone
	network your terminal is connected
	to.
80 - Toner save	Makes printing lighter to save toner
	cartridge ink.
90 - RAW Port	RAW network print port
	connection.
91 - Printer error	Time-out before document being
timeout	printed is deleted following a print
	error in PC print mode.
92 - Printer wait	Wait time-out for data from PC
timeout	before the task is deleted in PC
	print.
93 - Replace format	Page format change. This
	parameter allows you to print a
	LETTER format document on A4
	pages using the LETTER/A4
	setting.
96 - NBR. WEP	Number of WEP keys allowed
Keys	(from 1 to 4).

Printing the functions guide			Parameters/Setup
Note	The printing is not possible on A5
Important	(or Statement) paper format.
	51 - PRINT / FUNCTIONS LIST
Press , enter 51 using the keypad.
The printing of the functions guide starts.
	You can also access the PRINT menu
	by pressing the	button.	6 -

Printing the logs

Important	The printing is not possible on A5
	(or Statement) paper format.

The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by your machine.

An automatic print out will take place after every 30 transmissions. However, you may request a print out at any time.

Each log (incoming or outgoing) contains a table with the following information:

•date and time of the incoming or outgoing document,

•subscriber’s number or E-mail address,

•transmission mode (Normal, Fine, SFine or Photo),

•number of pages sent or received,

•call duration,

•incoming or outgoing results: noted CORRECT if properly transmitted,

or

information codes for special calls (polling, manual subscribers, etc.)

•reason for call error (example: your subscriber does not answer).

To print the logs:

54 - PRINT / LOGS

Press , enter 54 using the keypad.

The printing of the logs starts. The incoming and outgoing logs are printed on the same page.

Note	You can also access the PRINT menu
	by pressing the	button.

- 36 -