3 0 Before calling for service
Please make these simple checks before calling for service as problems pertaining to TV installation and adjustment are not covered under your warranty.
Symptoms
Colour patch (unevenness)
“Ghosts”or double images or Teletext garbled (for sets with Teletext only)
No picture
Good picture but no sound
Good sound but poor colour or no picture
Snowish picture and noise
Horizontal dotted lines
One white line across
TV not responding to remote control
Message
“ACCESS CODE
– – –
What you should do
4Switch off the TV with the mains power button and wait for at least 20 minutes before switching on again.
4Keep your TV away from any speakers or magnetic objects.
4Use of a highly directional antenna may improve the picture as this symptom may be due to obstruction by high rise buildings or hills.
4Check that the antenna at the back of the TV is properly connected.
4Possible TV station problem. Try another channel.
4Increase the volume.
4Check that the TV is not muted. If it is, press the
Âkey on the remote control to cancel mute.
4Adjust the contrast and brightness setting.
4Check the antenna connection.
4Switch off any nearby electrical appliances e.g. hairdryer, vacuum cleaner etc. as these may have caused interference.
4Switch off the TV immediately and call for after sales service.
4Check batteries and replace them if necessary.
4Check that the remote control is operating within the recommended range.
4The child lock function is switched on. Key in your
If you wish to switch off the child lock, refer to the section on “Child
