1
BASIC ANTENNA AND CABLE CONNECTIONS
Your home’s signal input might come from a single (75 ohm)
round cable, a Converter Box, or from an antenna. In either case the connec- tion to the TV is very easy.
1If your Cable TV signal or
Antenna Connection
Combination
VHF/UHF Antenna (Outdoor or Indoor)
300 to 75Ω
Antenna signal is a round
cable (75 ohm) then you're
Adapter
Back of TV
ready to connect to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
If you have a Cable Converter
Box: Connect the Cable TV sig- nal to the Cable Signal IN(put) plug on the Converter.
1
Twin Lead
Wire
Round Cable
75Ω
75 2
2Connect the Cable TV cable or Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug from the Converter to the 75Ω plug on the TV.
HELPFUL HINT
After using the AutoProgram Control, press the CH + and – buttons to scroll through all the channels stored in the television’s memory.
Direct Cable Connection
Cable signal coming from Cable Company
Back of TV
1
75
75Ω Round
Coaxial Cable
Jack Panel 2
Back of TV
