TROUBLESHOOTING
No Power
•Check the TVpower cord. Unplug the TV, wait 10 seconds, then reinsert
the plug into the outlet and push the POWER button again.
•Check that the outlet is not on a wall switch.
•Be sure the fuse is not blown on the AC power strip, if one is being used.
No Picture
•Check antenna connections. Are they properly secured to the TV's ANT
75Ωplug?
•Check the TUNER MODE control for the correct tuner setting.
•Try running the Auto Program feature to find all available channels.
•Press the AVbutton on the remote to make sure the correct signal source is
selected (FRONTor Current Channel).
No Sound
•Check the VOLUME buttons.
•Check the MUTE button on the remote control.
•If you’re attempting to hook up auxiliary equipment, check the audio jack
connections located on the front of the TV.
Remote Does Not Work
•Check the batteries. If necessary, replace them with AAHeavy Duty (Zinc
Chloride) or Alkaline batteries.
•Clean the remote control and the remote control sensor window on the TV.
•Check the TVpower cord. Unplug the TV, wait 10 seconds, then reinsert
the plug into the outlet and push the POWER button again.
•Be sure the fuse is not blown on the AC power strip, if one is being used.
•Check to be sure the TVoutlet is not on a wall switch.
TVDisplays Wrong Channel or No Channels Above 13
•Repeat channel selection.
•Add the desired channel numbers (using the CHANNELEDIT control) into
the TV’s memory.
•Check to be sure the TUNER MODES are set to the CABLEoption and run
the Auto Program feature to find all available channels.
35