19
SETTING TV TO TURN ON OR OFF USING START OR STOP CONTROLS
You can set your TV to turn itself on or off. You can set the TV to
turn itself On or Off once or at the same time everyday. Follow the steps below to set the Start and Stop Time.
Main |
|
|
|
Picture | Brightness |
|
|
Sound | Color |
|
|
Features | Picture | Main |
|
Install | Sharpness | Picture | Timer |
| Tint | ||
| Sound | AutoLock | |
| More... | ||
| Features | Active Control | |
|
| ||
|
| Install | Digi. Pic. Demo |
1 Press the MENU button on the remote to show the on- screen menu.
2 Press the CURSOR UP 3 or DOWN 4 buttons to scroll through the
3 Press the CURSOR RIGHT
2 button to display the Features menu.
Press the CURSOR RIGHT
4 2menu.button to display the Timer
5 Press the CURSOR UP 3 or DOWN 4 buttons to scroll through the Timer menu until Start Time or Stop Time is highlighted.
6 Enter the correct time by using the Numbered buttons.
Press the CURSOR RIGHT
7 2 or CURSOR LEFT 1 but- tons to change the AM or PM setting.
8 When finished, press the STATUS /EXIT button to remove the
| 2 |
|
1 | 5 | 8 |
7 |
|
|
2 | VOL | 3 |
5 |
| 4 |
6 |
| 7 |
Timer
Time
Start Time | |
Stop Time |
|
Channel |
|
Activate |
|
Display Timer |
|
Time |
|
Start Time |
|
Stop Time | |
Channel |
|
Activate |
|
Display |
|
Timer |
|
Time |
|
Start Time | 10:35 AM |
Stop Time |
|
Channel |
|
Activate |
|
Display Timer |
|
Time |
|
Start Time |
|
Stop Time | 10:35 AM |
Channel |
|
Activate |
|
Display |
|
Timer |
|
Time |
|
Start Time | 10:35 PM |
Stop Time |
|
Channel |
|
Activate |
|
Display Timer |
|
Time |
|
Start Time |
|
Stop Time | 10:35 PM |
Channel |
|
Activate |
|
Display |
|
NOTE: The Activate Control must be set to Once or Daily for the tele- vision to turn On or Off at the speci- fied time. See panel 21 for more details.
NOTE: Active Control will only appear in the menu of models 27PT6441/37 and 27PT6442/37.
HELPFUL HINTS
Remember, be sure to press “0” and then the hour number for single digit entries.
You can get to the Clock setting by pressing the Clock button on the remote control.
The TV’s clock settings may be lost when the TV is unplugged or when AC power to the set is interrupted.
